Treads / Steps / Slabs / Risers

You Are Here: Home / Products / Treads / Steps / Slabs / Risers

Treads

Treads or hearths are commonly used for mantel, wallcaps, and step risers. Treads are available in many different types of product.

  • Pennsylvania Flagstone Treads/ Granite Treads
    • This material is thermal on top and 1 long side with a gauged 2″ thickness.
  • Pacific Treads
    • Pacific Treads are thermal on the top with 1 rock faced long side. This material has a 2″ thickness.
  • Indian Sandstone Treads
    • Indian Sandstone is calibrated with a 2″ thickness with a natural top. This material is rock faced on 2 short sides and 1 long side.
  • Marble/Travertine Treads
    • Marble/Travertine Treads are gauged with a 2″ thickness. This is available in bullnose or straight edge. Available finishes are Antiqued and Sandblasted.

Steps

Steps are a precut uniform stone specifically used for a 6″ rise.

  • Pennsylvania Flagstone Steps
    • This material is thermal on top and 1 long side, or  with natural edges, with a gauged 6″ rise.
  • Pacific Steps
    • Pacific Steps are thermal on the top and the 2 short sides with 1 rock faced long side. This material has a 6″ rise.
  • Laurel Mountain Steps
    • Laurel Mountain is available in many different options. All have a 6″ rise.
      • Thermal on 6 sides
      • Thermal on 3 sides, rock faced 1 long side
      • Natural on 6 sides
      • Natural on 3 sides, rock faced 1 long side
      • Guillotined
  • Marble/Travertine Steps
    • Marble/Travertine Steps are gauged with a 6″ rise. Available finishes are Antiqued or Sandblasted.
  • Indiana Limestone Steps
    • Indiana Limestone Steps have a snapped face with a 6″ rise.
  • Granite Steps
    • This material has a thermal top with 1 rock faced long side with a 6″ rise.
  • South Pacific Bluestone Steps
    • This material is thermal on top and 1 long side and 2 short sides with a 6″ rise.
  • Midwestern Steps
    • This material has a snapped face with a 6″ rise.

Slabs

Slabs are commonly used for walkways, oversized retaining walls, natural out croppings, and natural steps. Slabs are typically 2′ – 6′ long x 2′ x 4′ wide x 4″ – 6″ thick.

Risers

Risers are commonly used for random steps. Risers have a uniform size and thickness. Risers are typically 2′ – 6′ long x 2′ – 4′ wide x 5″ – 8″ thick.

Directions

From Rt. 81

-Rt. 81 to EXIT 194 (old exit 58). FOLLOW SIGNS FOR Rt. 6W.

-TAKE Rt. 6W TO THE 8th TRAFFIC LIGHT.

-TURN LEFT ONTO WINOLA ROAD.

-CONTINUE APPROXIMATELY 2 MILES TO 2ND Y (DIRECTLY after Clarks Summit State Hospital)

-BEAR LEFT ONTO NEWTON RANSOM BLVD.

-TRAVEL APPROXIMATELY 5 1/3 MILES.

-TURN RIGHT ONTO DIRT ACCESS ROAD ( ¾ way down steep hill, across from guard rails.)

-YOU WILL ALSO SEE A BIG STONE SIGN THAT SAYS “EVERLAST” IN BIG RED LETTERS.

-FOLLOW ROAD TO FIRST WHITE BUILDING ON THE LEFT.

-ENTER OFFICE.

Directions from Philadelphia, Delaware and South Jersey:

From Route 476 (Northeast Extension of PA Turnpike) go to the end of the turnpike (Clarks Summit). Follow the signs for Rt. 6W (see directions at top of page.)

Directions from New England and Eastern New York:

Rt. 84W to 81N (see directions at top of page for Rt. 81)

Directions from Northern New Jersey and Long Island:

Rt. 80W to 380N to 81N (see directions at top of page for Rt. 81)

Directions from Virginia and Maryland:

Rt. 83N to 81N (see directions at top of page for Rt. 81)

Directions from Ohio and Western Pennsylvania:

Rt. 80E to 81N (see directions at top of page for Rt. 81)

Directions from Western New York:

Rt. 90(thruway) to 81S (see directions at top of page for Rt. 81)

Contact Us

Oops! We could not locate your form.

error: This content belongs exclusively to Ayers Supply, Inc.